Table of Contents
Advertisement
In most vehicles, the cables for the electric connection and the connection of the speakers have been laid
directly to the installation recess.
If this is not the case, please ensure that any cables placed later are secured by the respective on-board
fuses (see vehicle operation manual).
a) Connecting the antennas
FM antenna
• Insert the plug of your car's antenna into the FM antenna port (24) on the back of the device.
• If your vehicle has a different antenna plug, please use a suitable adapter available in specialist shops.
DAB antenna
• Insert the plug of the included DAB antenna into the DAB antenna port (20) on the back of the car radio.
• Manually tighten the union nut to secure the antenna.
• Connect the thin black wire of the DAB antenna to the antenna control output of the ISO plug (system plug A,
terminal 5, blue wire, see also "Connecting the speakers and the power supply").
b) Connecting the LINE outputs
The car radio has LINE outputs (23) for connecting a power amplifier.
The LINE outputs (23) should only be connected via suitable shielded cinch wires. Other cables may cause
interferences.
Keep the connecting cables as short as possible and do not place them near other cables to avoid
interferences in the cables.
To avoid distortions or mismatches that could damage the unit, the cinch connector must only be connected
to devices with suitable cinch terminals.
Connect the inputs of the power amplifier to the LINE outputs (23) on the back of the device.
The red socket is a terminal for the right channel and the white socket for the left channel.
c) AUX port
You can connect an external audio device (e.g. a portable MP3 player) to the AUX port (18). The signal of the audio
device is played back via the speakers.
• Connect the AUX port (18) to the audio output of the external device.
11
Advertisement
Table of Contents
