Installation In The Radio Slot; Removal - Renkforce GI700BR Operating Instructions Manual

Installation in the Radio Slot

Depending on installation situation in your car, the device is installed with or without the enclosed assembly
accessories.
• First remove the two retention screws at the top of the device.
• If required, push the installation frame into the installation slot of the vehicle and attach it.
• Install the enclosed assembly accessories if required.
• When you have made all the electrical contacts (see "Electric Connection"), insert the moniceiver into the
installation slot until it locks securely.

Keep the unlocking keys. You will need them for a later removal of the moniceiver.

Removal

• Insert the unlocking keys into the lateral slots between the moniceiver and the installation frame, until the
moniceiver unlocks.
• Carefully pull out the device from the installation opening by the unlocking keys.
• Disconnect all electrical connections.
53