Installation In The Radio Slot - Renkforce BSD-3023 Operating Instructions Manual

Mechanical Installation

Installation in the Radio Slot

• Unlock the installation frame with the two unlocking keys (figure1, item1).
• Remove the installation frame backwards from the device (figure1, item2).
• Push the installation frame into the vehicle's installation cut-out (figure2).
• Bend over some of the holding tabs at installation frame until the frame is securely fastened in the installation slot
(figure3).
• After producing all electrical connections (see "Electrical Connection"), push the device into the installation frame
until it latches securely (figure4).

Keep the two unlocking keys carefully. You will need them to remove the device again later.
• Additionally secure the device against vibration with the screw cone at the rear of the device.
• Such safety device is already intended in most vehicles. If it isn't in your vehicle, please attach the device with
the included perforated metal sheet.
Proceed as displayed in the following figure for attachment:
54
Operating Instructions

English