Advertisement
Available languages
Available languages
24
11. Exchange old BATTERY BOLTs of BATTERY CORD
(+) and (-) for new ones. (new BOLT is longer than old
one.)
(1) NEW BATTERY CABLE BOLT <60>
12. Connect SERVICE WIRE HARNESS ASSY T2 to
BATTERY with BATTERY CORDs (Fig.55). Connect
the connector (red) to BATTERY CORD (+) (positive
terminal side). And the other connector (black) to
BATTERY CORD (-) (negative terminal side) with M6
TIN NUTs.
[Tightening torque: 9.8 to 11.3 N-m (1.0 to 1.2 kgf-m)]
(1) SERVICE WIRE HARNESS ASSY T2 <62>
(2) BATTERY
(3) M6 TIN NUTs <59>
(4) BATTERY CORD (+)
(5) BATTERY CORD (-)
(P) POSITIVE TERMINAL
(N) NEGATIVE TERMINAL
13. Install UNIT COVER 2 to FUSE BOX STAY 2 with
FLANGE BOLTs (Fig.56).
[Tightening torque: 23.5 to 27.5 N-m (2.4 to 2.8 kgf-m)]
(1) UNIT COVER 2 <51>
(2) FUSE BOX STAY 2 <50>
(3) FLANGE BOLTs <53> x 2
(4) SERVICE WIRE HARNESS ASSY T2 <62>
(C), (D) TIE CABLE (SHORT) <64> x 2
14. Clamp SERVICE WIRE HARNESS ASSY T2 with TIE
CABLEs at four positions (See Fig.51 to 53, 56 (A) to
(D). The positions are marked with white tapes on
SERVICE WIRE HARNESS ASSY T2.)
Advertisement
