Table of Contents
Advertisement
Since the paper roll is highly thermal sensitive, please
keep them in a dark place that is 20º and 65% RH when
not installed in the printer.
Use a grounded AC power outlet.
Use only the power cord and power adaptor furnished
with the printer.
Do not use a power outlet of a circuit shared with any
equipment that causes great electrical noise, such as
motors.
Do not use a power outlet of a circuit shared with any
equipment that uses a lot of power, such as a copier or a
coffee maker.
Do not touch any connector contacts to avoid possible
electrostatic damage.
Do not allow the cut receipt to slide back into the cutter
during the operation. As this would lead to multiple
cutting at the lower edge of a receipt and the multiple
cut thin slips tend to cause mechanical malfunction.
USEFUL TIPS
H.
Do not touch the areas around the print head and motor
during or right after printing. It can be very hot.
Do not use thermal paper containing Sodium (Na+),
Potassium (K+) and Chlorine (Cl-) ions that can harm
the print head thermal elements.
Use only water paste, starch paste, polyvinyl paste or
CMC paste when gluing thermal paper.
1 - 6
Advertisement
Table of Contents
