Peripheral Connection - Epson PP-7000II User Manual

Epson printer user's manual pp-7000ii , pp-7000iiusb
Table of Contents

Advertisement

the
Posiflex
thermal printer will operate the
same way as if a RS232 serial
printer connected on the COM
port specified.
Please
note
allowed to apply more than one
Posiflex USB printer in one setup
because
each
printer
may
internal ID. The only point to watch is that you must assign each
USB printer with a different virtual COM port number. Similarly
in case one Posiflex USB printer is to be replaced by another
within field application, please always remember to assign the
necessary properties as above to the succeeding printer before
putting it to operate as the successor.

Peripheral connection

4.
The peripheral controller is a RJ11 jack near the serial
connector for PP-7000II and is the middle connector for PP-
7000IIUSB. With use of Posiflex cash drawer cable 20863018001
(CCBLA-180-1) come with cash drawer, this port can control a
Posiflex cash drawer CR3100 or CR3200 or CR4000 or CR4100.
If a Posiflex special split cable 20867023800 (CCBLA-238) is
used instead, this port can control two cash drawers of above
models.
When the printer is used as a kitchen printer, please use this
port for kitchen bell connection instead.
USB
interface
that
it
is
Posiflex
USB
carry
different
2 - 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pp-7000iiusb

Table of Contents