Software Commands; Paper Out Alarm; Enhancement Commands - Epson PP-7000II User Manual

SOFTWARE COMMANDS

D.
The Aura thermal printer supports all commands applicable
to Epson printer TM-T88II. The only difference is the
smoothening command in enlarged text fonts. Please visit our
web site http://www.posiflex.com or http://www.posiflex.com.tw
for detail description of the supported commands if required.

Paper out alarm

1.
When Paper End signal is detected, the printer keeps on
intensive beeping and stops receiving data till the signal is
When Paper Near End signal is detected, the
neutralized.
printer gives a beep every 3 seconds and stops receiving data.

Enhancement commands

2.
Following commands are included in the printer firmware
version since ver. 3.2:
ESC 'o': Beep command
GS 'o' m: Beep definition (0 < m ≦ 16, default 3 seconds)
ESC 'p' m n1 n2: Cash drawer kick or kitchen bell drive
command
GS 'p' m n: Beep when cash drawer remain open (0 < m <
256, n = '0' or '1')
Explanations as below:
ESC 'o': Beep command
Hexadecimal codes are: 1B 6F
Printer beeps when this command is received per condition
set by beep definition.
GS 'o' m: Beep definition (0 < m ≦ 16, default 3 seconds)
Hexadecimal codes are: 1D 6F m
5 - 5