Advertisement
PHASE 2 – INSTALLATION
2.1 OEM INSTALLATION
2.1.1 • Place the Grab Handle against a flat surface.
• Mark the holes of the Grab Handle, then drill the mark using 1/2" drill bit.
• Install the plusnut to the holes.
• Install the Grab Handle to the plusnut using OEM fastener kit.
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Drill
q Marker
q 1/2" Drill Bit
q Torque Gun
q 1/2" Socket
HARDWARE USED
2×
( 17 ft • lbs )
#90-208 Hex Bolt
#98-122 Lock Washer
#98-110 Flat Washer
#94-132 Plus nut
6093-27 Installation Guide | REV. A1 | Page 6
5/16" × 1"
Advertisement
