PHASE 2 – INSTALLATION 2.1 VEHICLE PREPARATION 2.1.1 Floor preparation. Remove the 2 D-rings, for re-use. TOOLS q Cordless Impact q T50 Torque Bit C13-E Installation Guide | REV. F4 | Page 6 For technical support, contact us at 1-800-565-5321...
Page 7
TOOLS q Cordless Drill q 10mm Socket q 9/64" Drill Bit HARDWARE USED 10× #90-971 Self-Tapping Screw M6 C13-E Installation Guide | REV. F4 | Page 7 For technical support, contact us at 1-800-565-5321...
Page 8
2.2.2 Attach the floor bracket to the van using 2 D-rings, then tighten the bolts that attach the froor bracket and lower panel. TOOLS q Cordless Impact q T50 Torque Bit HARDWARE USED 2× Use the D-ring bolt C13-E Installation Guide | REV. F4 | Page 8 For technical support, contact us at 1-800-565-5321...
Page 9
2.2.3 Apply the warning label on the passenger side bracket. NOTE: The english warning label is already attached to the passenger side panel. C13-E Installation Guide | REV. F4 | Page 9 For technical support, contact us at 1-800-565-5321...
Page 10
“Congratulations, you have successfully installed your C13-E Partition! Thank you for doing business with us.” cs@rangerdesign.com For any feedback or suggestions you may have, please contact: C13-E Installation Guide | REV. F4 | Page 10 For technical support, contact us at 1-800-565-5321...