Advertisement
Advertisement
Table of Contents
Related Manuals for Ranger design 1506-TC Cargo Plus
Summary of Contents for Ranger design 1506-TC Cargo Plus
-
Page 1: Installation Guide
INSTALLATION GUIDE 1506-TC Cargo Plus Long Ford Transit Connect 120.5" Wheelbase... -
Page 2: Phase 1 - Assembly
PHASE 1 – ASSEMBLY 1.1 SETUP 1.1.2 Verify all parts are present. 15-U4000 BOX ×4 ngled uBBer paCer ×6 ×6 ×6 ×6 addle xtruSion uBBer paCer “r” ×1 “l” ×1 “l” n ×2 CFK - 1 ×1 CFK - 2 ×1 CFK - 3 ×1 oller upport oller... -
Page 3: Required Items
HARDWARE ( M8 × 65 ) ×12 ( M8 × 35 ) ×2 ( M8 × 40 ) ×2 ( M6 × 35 ) ×2 ( M8 ) ×16 ( M8 ) ×16 ( M8 ) ×16 ( M8 ) ×4 ( M8 ) ×24 ( M6 ) ×2 ( M6 ) ×2... -
Page 4: Phase 2 - Installation
PHASE 2 – INSTALLATION 2.1 INSTALLATION 2.1.1 Install the feet. FRONT MIDDLE M6 × 35 M8 × 35 INSIDE INSIDE “l” n ×2 1506-TC Installation Guide | REV. B1 | Page 4 For technical support, contact us at 1-800-565-5321... - Page 5 REAR M8 × 40 INSIDE 1506-TC Installation Guide | REV. B1 | Page 5 For technical support, contact us at 1-800-565-5321...
- Page 6 2.1.2 Connect the 2 side rails parts. 2× STEP 1 STEP 2 10 NM STEP 3 STEP 4 1506-TC Installation Guide | REV. B1 | Page 6 For technical support, contact us at 1-800-565-5321...
- Page 7 2.1.6 Attach the roller to the side rails using 2.1.3 Install 3 bars in the feet. the 2 last channel nuts from the front. 2.1.4 Slide 8pcs. of channel nuts in each 2.1.7 Slide the rack to the appropriate side rails. position.
- Page 8 2.1.9 Attach the 3 bars. 2.1.10 Attach the foot cowl to the foot. PHASE 3 – TIPS 3.1 SAFETY TIPS 1506-TC Installation Guide | REV. B1 | Page 8 For technical support, contact us at 1-800-565-5321...
- Page 9 “You have successfully installed your 1506-TC Cargo Plus Thank you for doing business with us.” cs@rangerdesign.com For any feedback or suggestions you may have, please contact: 1506-TC Installation Guide | REV. B1 | Page 9 For technical support, contact us at 1-800-565-5321...
Need help?
Do you have a question about the 1506-TC Cargo Plus and is the answer not in the manual?
Questions and answers