Advertisement
PHASE 1 – INSTALLATION
1.2 TIPS HOW TO INSTALL PLUSNUT
1.2.1 How to attach plus nut.
•
using plusnut gun
STEP: Put the plusnut on the plusnut gun, then attach the plus nut in the hole by turning the gun forward until
the plus nut locks, then remove the gun by turning in reverse.
FORWARD
•
using plusnut tool
NOTE: The hardware used for the plusnut tool is not included in the fastener bag.
The plusnut tool can be ordered separately upon demand at no charge.
PLUSNUT TOOL
STEP 1:
Assemble the plusnut tool with the hardware needed, plus nut
and the 9/16" wrench as shown.
For technical support, contact us at 1-800-565-5321
REVERSE
HARDWARE USED
Flat washer 5/16"
Flat washer 5/16" BS × 7/8" OD
TOOLS
q Cordless Impact
q 1/2" Socket
q 9/16" Wrench
STEP 2:
Attach the plus nut in the hole by turning
the bolt forward using an impact with a
1/2" socket until the plusnut locks, then
remove the bolt by turning the impact in
reverse.
FORWARD
REVERSE
6093-27 Installation Guide | REV. A1 | Page 5
Advertisement
