1.1.1 Unpack components; compare with the bill of materials. arge andLe 1.1.2 Verify all parts are present. Item No. Description Qty. Large Grab Handle Large Grab Handle 6093-27 Installation Guide | REV. A1 | Page 3 For technical support, contact us at 1-800-565-5321...
Page 5
1/2" socket until the plusnut locks, then remove the bolt by turning the impact in reverse. FORWARD REVERSE 6093-27 Installation Guide | REV. A1 | Page 5 For technical support, contact us at 1-800-565-5321...
HARDWARE USED 2× ( 17 ft • lbs ) #90-208 Hex Bolt 5/16" × 1" #98-122 Lock Washer #98-110 Flat Washer #94-132 Plus nut 6093-27 Installation Guide | REV. A1 | Page 6 For technical support, contact us at 1-800-565-5321...
Page 7
2.2.2 • Place the Grab Handle to Ranger Design unit or panel. • Mark the holes of the Grab Handle, then drill the mark using 3/8" drill bit. • Install the Grab Handle to the Ranger Design unit or panel using Ranger Design fasyener kit. 3/4"...
Page 8
“You have successfully installed your Large Grab Handle Thank you for doing business with us.” cs@rangerdesign.com For any feedback or suggestions you may have, please contact: 6093-27 Installation Guide | REV. A1 | Page 8 For technical support, contact us at 1-800-565-5321...