Digital Input; The Monitor - Eizo RadiForce R22 User Manual

English

Digital Input

Signal Cable (FD-C39
enclosed)
2.
Plug the power cord into the power connector on the rear of the
monitor.
3.
Lead the power cord and signal cable into the cable holder at rear of

the monitor.

NOTE
• When housing the cables into the cable holder, lead them to the cable entrance
side and pinch the projection to open the cable entrance.
• The cables are recommended to lead with slight sag for the smooth motion of
the stand and the Portrait/Landscape display.
4.
Plug the other end of the power cord into a power outlet.
The monitor's power indicator will flash yellow slowly.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
14
2. CABLE CONNECTION
Signal Cable
Cable Holder
Connector
Video Output
Connector / DVI
Input Connector
(monitor) / DVI
Projection
Cable Entrance
PC
•
Digital graphics board
•
Power Mac G4(DVI)