Eizo RadiForce R22 User Manual page 17

3.
Lead the power cord and signal cable into the cable holder at rear of
the monitor.
NOTE
• When housing the cables into the cable holder, lead them to the cable entrance
side and pinch the projection to open the cable entrance.
• The cables are recommended to lead with slight sag for the smooth motion of
the stand and the Portrait/Landscape display.
Cable Holder
4.
Plug the other end of the cord into a power outlet.
The monitor's power indicator will flash yellow slowly.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock. Not doing so
may result in fire or electric shock.
Projection
Cable Entrance
2. CABLE CONNECTION
English
17