Connecting The Signal Cable (For The Computer Employing D-Sub Or Dvi Connector); Analog Input - Eizo RadiForce R22 User Manual

2-2. Connecting the signal cable (For the
computer employing D-Sub or DVI
connector)
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.

Analog Input

Signal Cable (MD-C87
enclosed)
Signal Cable (MD-C87
enclosed) + Adapter*
Signal Cable (FD-C16
enclosed)
Signal Cable (FD-C16
enclosed) + Adapter*
Signal Cable
Power Cord
Connector
Video Output
Connector / D-Sub mini
15 pin
Input Connector
(monitor) / D-Sub mini
15 pin
Video Output
Connector / D-Sub 15
pin
Input Connector
(monitor) / D-Sub mini
15 pin
Video Output
Connector / D-Sub mini
15 pin
Input Connector
(monitor) / DVI
Video Output
Connector / D-Sub 15
pin
Input Connector
(monitor) / DVI
2. CABLE CONNECTION
English
PC
•
Standard graphics card
•
Power Macintosh G3 (Blue &
White) / Power Mac G4
(VGA)
•
Macintosh
*Macintosh Adapter (Optional)
•
Standard graphics card
•
Power Macintosh G3 (Blue &
White) / Power Mac G4
(VGA)
•
Macintosh
*Macintosh Adapter (Optional)
13