2-2. Connecting the Signal Cable (For the computer
employing D-Sub or DVI connector)
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable
Signal Cable
(FD-C16 enclosed)
Digital Input
Signal Cable
Signal Cable
(FD-C39 enclosed)
NOTE
The monitor is not compatible with a Power Mac G4/G5 (Apple Display
Connector).
Power Cord
Connector of the PC
Video Output Connector /
D-Sub mini 15 pin
Input Connector (monitor)
/ DVI
Connector of the PC
Video Output Connector /
DVI
Input Connector (monitor)
/ DVI
PC
Standard graphics card
Power Macintosh G3
(Blue & White) / Power
Mac G4 (VGA)
PC
Digital Graphics card
Power Mac G4/G5 (DVI)
2. CABLE CONNECTION
English
13