Table of Contents
Advertisement
EBI-6
English
Using the software EBI- QUICKLOG,
your logger may be programmed and
started, and data may be read out.
Please follow the procedures described
in this operating manual or in the online
help.
If required, ebro Electronic GmbH &
Co. KG will carry out the programming
and later the readout of the data.
On the front side of the logger, open the
red protector cap of the jack. Connect
the RS interface and connect your
logger with the PC.
If your PC has a 5-pin COM inter-
face, please use the appropriate
data cable.
Program the logger.
Please note:
Sampling rate and ambient temperature
have an effect on the life span of the
battery.
In order to preserve the battery, you
should deactivate your logger whenever
possible.
After programming, always close the jack
with the red protector cap. This ensures
that the logger remains watertight.
1
Advertisement
Table of Contents
