ADJ FOCUS SPOT 4Z User Manual page 22

S Y S T E M M E N U
BACKLIGHT. - Use this function to adjust the display LCD backlight time from 2-60 minutes.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP/DOWN buttons to select "LCD.Set", then press ENTER.
3. Use the UP/DOWN buttons to highlight "Backlight" and press ENTER.
4. The current shutoff time will be displayed ("05m" is the default setting). Use the LEFT/RIGHT buttons
to adjust the shutoff time between 02m-60m, or "Off."
5. Press the ENTER button to confirm your selection, or press the MODE button to exit.
FLIP DISPLAY - Use this function to rotate (flip) the display 180°.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP or DOWN buttons to select "LCD.Set", then press ENTER.
3. Use the UP or DOWN buttons to select "Flip Display", then press ENTER.
4. Depending on which direction is set for Flip Display, either "Off" or "On" will be displayed. Use the
LEFT/RIGHT buttons to flip between settings.
5. Press the ENTER button to confirm your selection, or press the MODE button to exit.
KEY LOCK - Activating this function locks the buttons after 15 seconds.=.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP or DOWN buttons to select "LCD.Set", then press ENTER.
3. Use the UP or DOWN buttons to select "Key Lock", then press ENTER.
4. Use the LEFT/RIGHT buttons to scroll through Key Lock options, then press ENTER.
"OFF" - The keypad is unlocked. Press the MODE button to activate the keypad.
•
"ON" - This is keypad lock. Press the MODE button for at least 5-seconds to unlock the keypad.
•
• "ON1" - Use this setting to prevent accidental keypad unlocking. A code needs to be entered to
unlock keypad. Press UP, DOWN, UP, DOWN, & ENTER in that order.
5. Press the ENTER button to confirm your selection, or press the MODE button to exit.
DISPLAY FLASH - Use this function to have display flash with the loss of a DMX signal.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP or DOWN buttons to select "LCD.Set", then press ENTER.
3. Use the UP or DOWN buttons to select "DispFlash", then press ENTER.
4. Depending on current setting, either "Off" or "On" will be displayed. Use the LEFT/RIGHT buttons
to scroll through settings.
5. Press the ENTER button to confirm your selection, or press the MODE button to exit.
CHANNEL VALUE - Use this function to display DMX value of each DMX channel in use.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP or DOWN buttons to select "Disp.Set", then press ENTER.
3. Use the UP or DOWN buttons to select "Chan. Value", then press ENTER.
4. A DMX channel will now display. Example: Pan, Rotation, LEDs... The channel DMX value will be
displayed when you press ENTER.
5. Press the MODE button to exit.
SECONDARY SET - Use this function to designate unit as secondary in a Primary-Secondary
configuration.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP or DOWN buttons to select "Disp.Set", then press ENTER.
3. Use the UP or DOWN buttons to select "Secondary Set", then press ENTER.
4. Depending on current setting, "Secondary 1", "Secondary 2", or "Secondary 3" will be displayed.
Use the UP/DOWN buttons to scroll through settings.
5. Press the ENTER button to confirm your selection, or press the MODE button to exit.
22