ADJ FOCUS SPOT 4Z User Manual page 21

S Y S T E M M E N U
HIBERNATION - Use this function to turn off LEDs and step-motors without a DMX signal after 15
minutes (factory default). The fixture will reset with a reactivated DMX signal.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP/DOWN buttons to select "Status", then press ENTER.
3. Use the UP/DOWN buttons to select "Hibernation", then press ENTER.
4. The current standby signal will be displayed. Use the UP/DOWN buttons to adjust hibernation period
between "01M-99M" or "Off".
5. Press the ENTER button to confirm your selection, or press the MODE button to exit.
DIMMER MODE - Use this function to change the dimmer curve setting (see Dimmer Curve Chart on
page 25).
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP/DOWN buttons to select "Dim Mode", then press ENTER.
3. Use the UP/DOWN buttons to find and select applicable curve setting.
4. The current dimmer curve will be displayed. Use the UP/DOWN buttons to select applicable dimmer
curve.
5. Press the ENTER button to confirm your selection, or press the MODE button to exit.
TEMPERATURE C/F - Use this function to change the temperature display between Celsius and
Fahrenheit.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP/DOWN buttons to select "Temp. C/F", then press ENTER.
3. Depending on current setting, either "Celsius" or "Fahrenheit" will be displayed. Use the UP/DOWN
buttons to highlight applicable temperature scale.
4. Press the ENTER button to confirm your selection, or press the MODE button to exit.
GAMMA ADJUSTMENT - Use this function to adjust gamma setting. This feature is primarily used
when shooting video.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP/DOWN buttons to select "Gamma", then press ENTER.
3. Use the UP/DOWN buttons to highlight applicable setting.
4. Press the ENTER button to confirm your selection, or press the MODE button to exit.
FREQUENCY ADJUSTMENT - Use this function to adjust dimming frequency. This feature is mostly
used when shooting video for a flicker free operation.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP/DOWN buttons to select "Frequen", then press ENTER.
3. Use the UP/DOWN buttons to highlight applicable setting.
4. Press the ENTER button to confirm your selection, or press the MODE button to exit.
FAN SET - Use this function to adjust the moving head fan speed.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to "Function",
then press ENTER.
2. Use the UP/DOWN buttons to select "Fan Set", then press ENTER.
3. Use the UP/DOWN buttons to highlight "Head Fan" and press ENTER.
4. Use the UP/DOWN buttons to adjust the head fan speed.
5. Press the ENTER button to confirm your selection, or press the MODE button to exit..
21