Safety Instructions For Maintenance; Possible Malfunctions - Bartscher 107.000 Instruction Manual

6.3 Safety instructions for maintenance

o Check the power cord from time to time for damage. Do not use the appliance if
the cord is damaged. If the cord is damaged it must be replaced by the customer
service centre or by a professional electrician in order to avoid hazards.
o In case of damage or faults, contact your dealer or our customer service centre.
Before doing so, note the information on troubleshooting in section 7.
o Maintenance and repairs must be performed only by qualified personnel using
original spare parts and accessories. Never try to carry out repairs on the
appliance yourself.

7. Possible malfunctions

Problem
No function
No cooling
No heat output
The above-mentioned problems serve only as references and examples. Should
those or similar problems arise, turn off the appliance immediately and stop the
operation. Contact qualified professional personnel or the manufacturer
immediately.
- 34 -
Cause
•
Plug not plugged in
correctly.
•
The fuse of the power
supply has tripped.
•
Power supply interrupted.
•
Defective temperature
regulator.
•
Temperature
exceeds 80 ° C.
•
Power supply interrupted.
•
Faulty heating element.
•
Faulty temperature
regulator.
Remedy
•
Pull out the plug and
plug-in correctly.
•
Check the fuse, check
the appliance on
another socket.
•
Check power supply.
•
Contact dealer.
•
Leave the appliance to
cool down below 80 ° C.
•
Check power supply.
•
Contact dealer.
•
Contact dealer.