Advertisement
10 Port Managed USB 3.2 Gen 1 Hub w/
15KV
ESD Surge Protection
Model No.
CG-10PU3MGD
1. Introduction
Thank you for purchasing this 10-port Managed USB3.2 Gen 1 hub. The
Super-speed Hub is supplied with managing software utilities which can turn
on/off the bus power of each downstream device or even reset the entire hub by
user or application programs. It enables the success of your critical USB
applications instantly and improve your investment returns.
Features:
✓ Compliant with USB Specification 3.2 Gen 1
✓ Metal Case, DIN Rail and wall mountable
✓ Software Manageable Bus power for each Port
✓ Supports software utilities for Windows (XP and above), Linux
✓ Provides 10 Downstream USB3.2 Gen 1 Facing Ports (see Note 1)
✓ Provides 10 LEDs Indicating each bus power states
✓ Supports 5Gbps (Super-speed), 480Mbps (High speed), 12Mbps (Full-speed)
and 1.5Mbps (Low-speed) Speed
✓ Supports 15KV ESD Level 4 Protection for Each Port
✓ Supports +7~24V DC Wide Range Input Power
✓ Supports USB Battery Charging v1.2 : CDP, DCP modes
1
Advertisement
Table of Contents
Related Manuals for CoolGear CG-10PU3MGD
Summary of Contents for CoolGear CG-10PU3MGD
- Page 1 10 Port Managed USB 3.2 Gen 1 Hub w/ 15KV ESD Surge Protection Model No. CG-10PU3MGD 1. Introduction Thank you for purchasing this 10-port Managed USB3.2 Gen 1 hub. The Super-speed Hub is supplied with managing software utilities which can turn on/off the bus power of each downstream device or even reset the entire hub by user or application programs.
-
Page 2: Connector Layout
10-Port Managed USB3.2 Gen 1 Metal Hub with DIN RAIL Mounting Kit 2. Connector Layout USB-B Upstream Power Input 10 USB-A Downstream Ports Port Connector Connector Power LED 10 Port On/Off State LED Indicators USB-A Downstream Facing Port Connectors: There are 10 USB-A connectors for standard USB3.2 Gen 1 and legacy USB2.0/1.1 devices. -
Page 3: Hardware Installation
10-Port USB3.2 Gen 1 Managed Metal Hub with DIN RAIL Mounting Kit wide range power source to self-power the hub, the voltage can be in the range from +7V to 24V DC. 3. Hardware Installation Use static electricity discharge precautions. Remove possible static discharge potential from any objects that the hub may come in contact with before installation. - Page 4 10-Port Managed USB3.2 Gen 1 Metal Hub with DIN RAIL Mounting Kit Mount your hub on the wall or DIN RAIL if required. DIN RAIL Clip Wall mounting holes Install the USB Hub Administrator Utilities as described in the following chapter 4.
- Page 5 10-Port USB3.2 Gen 1 Managed Metal Hub with DIN RAIL Mounting Kit Please follow the on-screen instructions of the setup program to complete the installation. After installed, it will launch the utility automatically: ⚫ Click Auto Search to find all Managed USB Hubs ⚫...
- Page 6 10-Port Managed USB3.2 Gen 1 Metal Hub with DIN RAIL Mounting Kit To use the console utility CUSBC to control the USB devices, please run Command Prompt as follows: To see all CUSBC commands, type: CUSBC /?
-
Page 7: Restore To Factory Settings
10-Port USB3.2 Gen 1 Managed Metal Hub with DIN RAIL Mounting Kit To query all Hubs connected: CUSBC /Q 5. Restore to Factory Settings To perform a factory reset: Verify that your hub’s Power LED is off. On the side of your hub, locate the hole of the Restore Factory Settings button: Restore Factory Settings button... - Page 8 10-Port Managed USB3.2 Gen 1 Metal Hub with DIN RAIL Mounting Kit Your hub resets to its factory default settings: ⚫ All ports are On ⚫ The password: pass...
-
Page 9: Environmental Specifications
10-Port USB3.2 Gen 1 Managed Metal Hub with DIN RAIL Mounting Kit 6. Environmental Specifications Operating temp.: 0 to 55C (32 to 131F) Operating humidity: 5 to 95% RH Dimensions (LxWxH): 197.7x55.5x31.0 mm (7.78 x 2.18 x 1.22 in)
Need help?
Do you have a question about the CG-10PU3MGD and is the answer not in the manual?
Questions and answers