Related Manuals for CoolGear CG-10U2AML
Summary of Contents for CoolGear CG-10U2AML
- Page 1 10 Port USB 2.0 Hub w/ ESD Surge Protection Screw Locking Ports Model Number: CG-10U2AML Installation Guide Coolgear, Inc. Version: 1.0 Date: 05/07/2024...
-
Page 2: Connector Layout
First Release 1. Introduction Thank you for purchasing Coolgear’s 10 Port USB 2.0 Hub. Thank you for purchasing this high-speed 10-port USB2.0 hub. It provides an ideal solution to expand 10 USB2.0 ports from one single USB2.0 host port. It provides a wide range self power source (+5~24VDC from the 2-pin Terminal Blocks or DC Jack) to supply enough power on USB2.0 buses. -
Page 3: Hardware Installation
It will NOT affect your USB function. 4. Connect the USB devices to the downstream ports of this hub. 5. Mount your hub on the wall or DIN RAIL (with optional mounting kit) if required. Need help? Visit: coolgear.com/support... -
Page 4: Checking The Hub Installation
To check the USB2.0 hub installation in Windows device manager, please follow the following steps: 1. Click Start Control Panel System Device Manager button 2. Double click Universal Serial Bus Controller 3. Double click Generic USB Hub, the message will show that this device is working properly. Need help? Visit: coolgear.com/support... -
Page 5: Environmental Specifications
Within Every Great Machine For over 20 years our rugged, off-the-shelf USB hubs, chargers, and serial products are ready to go for your next project. Based in the US, Coolgear has successfully engineered and deployed millions of connectivity solutions into industrial, medical, automotive, commercial, and aerospace industries. - Page 6 (iv) normal wear and tear; (v) damage to or loss of repaired or replaced Products during shipping by Coolgear except when such damage or loss is caused by poor or inadequate packaging by Coolgear; or (vi) Products purchased outside the United States.
Need help?
Do you have a question about the CG-10U2AML and is the answer not in the manual?
Questions and answers