Related Manuals for CoolGear CG-10U3AML
Summary of Contents for CoolGear CG-10U3AML
- Page 1 10-Port USB3.0 Metal Hub w/Surge Protection and DIN RAIL Mounting Kit Model Number: CG-10U3AML Installation Guide Coolgear, Inc. Version: 1.0 Date: 04/17/2024...
-
Page 2: Table Of Contents
First Release 1. Introduction Thank you for purchasing Coolgear’s 10-Port USB3.0 Metal Hub. It provides an ideal solution to expand 10 USB3.0 ports from one single USB3.0 host port. It provides a wide range self power source (+7~24VDC from 2-pin Terminal Blocks) to provide enough power on USB3.0 buses. -
Page 3: Hardware Installation
Since the USB hub is plug-and-play, you don’t have to turn off your host computer when installing the hub. Connect the USB devices to the downstream ports of this hub. Mount your hub on the wall or DIN RAIL if required. Need help? Visit: coolgear.com/support... -
Page 4: Checking The Usb3.0 Hub Installation
Double click Generic USB Hub, the message will show that this device is working properly. 5. Environmental Specifications Operating temp.: 0 to 70°C (32 to 158°F) Operating humidity: 5 to 95% RH Dimensions (LxWxH): 7.78”(L)x2.18”(W)x1.22”(H) (197.7x55.5x31.0 mm) Need help? Visit: coolgear.com/support... - Page 5 Technical Support When you reach out to Coolgear support, you’ll find yourself in the hands of a solution-oriented and knowledgeable expert ready to answer whatever question you throw at them. If you ever need help with your product, visit coolgear.com/support for support tickets, downloads, and other support resources.
- Page 6 (iv) normal wear and tear; (v) damage to or loss of repaired or replaced Products during shipping by Coolgear except when such damage or loss is caused by poor or inadequate packaging by Coolgear; or (vi) Products purchased outside the United States.
Need help?
Do you have a question about the CG-10U3AML and is the answer not in the manual?
Questions and answers