Page 2
Assembly Instructions 2/7 IMPORTANT Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. STEP 1 Insert Cam Lock Screws into the pre-drilled holes of Side Panels (B) and (C) (see Figure 1) Cam Lock Screw (Figure 1)
Page 3
Assembly Instructions 3/7 Cam Lock STEP 3 Cross Dowel Attach Middle Panel (D) to unit with Head Cap Bolts and Cross Dowels. Attach Front Rail (E) and (F) to unit using Cam Locks. Head Cap Bolt (long) (Figure 4) Wood Screw (short) for Back Rail Cam Lock STEP 4...
Page 4
Assembly Instructions 4/7 STEP 5 Attach Frame Leg (P) and (Q) to unit with Head Cap Bolts. Head Cap Bolt (Figure 5) (Figure 6) STEP 6 Slide Drawer (O) into place. Insert Adjustable Pin into side panels and middle panels at the desired level.
Page 5
Assembly Instructions 5/7 Drawer (O) N3 O4 STEP 1 Figure 1 Attach O1 to O3 and O4, using Phillips screwdriver MAKE SURE ROLLER long wood screws (4X) IS ON THE BACK tighten halfway. Attach O2 to O3 and O4 using long wood screws (4X)
Page 6
Assembly Instructions 6/7 Head Cap Bolt (short) STEP 7 (Figure 7) Pull out the Drawers from unit. Place Top (A) onto the unit, using Head Cam Bolts (short). (see Figure 7) Side Drawers into place.
Page 7
Assembly Instructions 7/7 Top Extension Instructions STEP 1 Lift up the Leaf Top. STEP 2 Holding the Leaf Top up, pull out a back leg from the unit; then pull out the other back leg.
Need help?
Do you have a question about the Monarch Kitchen Island 88 5008 941 and is the answer not in the manual?
Questions and answers