Huvitz Excelon Operator's Manual page 37

Excelon Operator's Manual
36
Edger Control Panel
CLAMP
• Be sure that Lens Position Button only works during Roughing process. It is
useful to adjust the lens position if the lens exceeds the wheel range because
of the thickness.
• Clamp Buttons in the Left and Right provide the exactly same function. They
are provided for the convenience to press the button by the bare hand without
holding the lens.
STOP
One Stop Edging Execution
LENS POSITION
Button for adjusting the Lens
Position in Roughing Process
(Real Time)
CLAMP
START
! NOTE