Huvitz Excelon Operator's Manual page 13

Excelon Operator's Manual
12
is imperative for its safe operation. Therefore, please read carefully all instructions
before switching on this device. For more detailed information, please contact our
Customer Service Department or one of our authorized representatives.
① This equipment must not be used (a) in an area that is in danger of explosions
and (b) in the presence of flammable, explosive, or volatile solvent such as
alcohol, benzene or similar chemicals.
② Do not put or use this device in humid rooms. Humidity should be maintained
between 50% and 80% for normal operation. Do not expose the device to water
splashes, dripping water, or sprayed water. Do not place containers containing
fluids, liquids, or gases on top of any electrical equipment or devices.
③ The equipment must be operated only by, or under direct supervision of a
properly trained and qualified person.
④ The service technician of Huvitz or the technician authorized by Huvitz may only
carry out modifications of this equipment.
⑤ Customer maintenance of this equipment may only be performed as stated in the
User's Manual and Service Manual. Any additional maintenance may only be
performed by the service technician of Huvitz or the technician authorized by
Huvitz.
⑥ The manufacturer is only responsible for effects on safety, reliability, and
performance of this equipment when the following requirements are fulfilled: (1)
The electrical installation in the respective room corresponds to the specifications
stated in this manual and (2) This equipment is used, operated, and maintained
according to this manual and Service Manual.
⑦ The manufacturer is not liable for damage caused by unauthorized tampering
with the device(s). Such tampering will forfeit any right to claim under warranty.