Lubrication; Lubricating Oil; Lubricating - Yamato VFK2560-8 Instruction Manual

High speed 4 needle flatbed flatseamer

Table of Contents

. Lubrication

Before lubricating, ALWAYS turn the power switch OFF and check that the machine has already stopped.

4.1 Lubricating oil

Use YAMATO SF OIL No. 28.

Never add additives to the oil.

If added, it can cause the deterioration of the oil and the

damage to the machine.

When using a new machine, or a machine which has not

been run for a while, supply a few drops of oil to the needle

bar ① .

Remove the seal plug ② indicated "OIL-IN" and supply oil

to the upper line of the oil sight gauge ④ .

Check that oil splashes from the nozzle inside the oil sight

window ③ while running a machine.

If oil does not splash from the nozzle, see "4.4 Checking

and replacing oil filter" on page 13.

Too much or insufficient oil can cause oil leakage and

machine trouble. Be sure to keep the oil level between

the lines. Also too much lubrication can cause the oil

scatter and material stain.

VFK2560-8

Fig. 4-1

③

Fig. 4-2

④

Fig. 4-3

①

②

Table of Contents