Installing Supplimentary Table - Yamato VFK2560-8 Instruction Manual

2. Installation
2.1.3 Installing supplementary table
Section A - A
Fig. 2-4 Supplementary table
Assembly
(1) Mount the adjustable feet ② on the adjustable foot
plate ① (3 sets).
(2) Mount (1) above onto the supplementary table ｂｙ wood
screws ③ .
(3) Turn the adjustable feet and adjust their heights so that
the top of the supplementary table and cloth plate (small)
⑩ are made level at the same height, and secure the
feet ② using the nuts ④ .
(4) Adjust the supplementary table stay (lower) ⑤ and stay
(upper) ⑥ to the same height as the base of adjustable
feet ② , and join them using the screw ⑦ .
Installation
Place the supplementary table on the machine, and anchor
it to the machine table using the wood screws ⑨ at the
position where the supplementary table stays ⑧ press
down on the adjustable foot ② at the rear left.
Tighten the wood screws ⑨ so that the supplementary
table stays ⑧ turn.
The supplementary table stays
mounted without fail in order to ensure that the
supplementary table will not turn over.
VFK2560-8
thickness 20 ㎜
Fig. 2-5
Fig. 2-6
⑧
must be
Fig. 2-7
4
①
④
②
⑦
⑨
⑦
⑥
⑩
⑨
⑧
②
③
②
⑤