Proper Operation; Needle System; Installing Needles - Yamato AZ7000SDR-8 Instruction Manual

5.

Proper operation

5.1 Needle system

AZ7000SDR-8
AZ7003SDR-8,AZ7020SDR-8,
AZ7120SDR-8 class
AZ7500SDR-8 class
Select proper needles in size according to the thickness
and the type of the material.

5.2 Installing needles

Before installing the needles, ALWAYS turn the mo-
tor switch OFF and check that the motor has already
stopped.
(1) Loosen the screw ① with a minus screw driver.
(Fig. 5-1)
(2) Remove the old needle with a pair of tweezers.
(3) Insert a new needle into the needle clamp ② as far as
it goes with facing its scarf to the right back.
(Fig. 5-2 and 5-3)
(4) Tighten the screw ① with the minus screw driver.
● Accessories include the minus screw driver.
The tightening torque of the screw ① is 0.6 N･m.
NO
Fig. 5-2
: DC×1 ( or 81×1 )
: DC×27 ( or B27, 1886 )
: DC×27 ( or B27, 1886 )
OK! NO
japanese
standard
metric
standard
Table 5
②
① ①
AZ7020SDR-8
Fig. 5-1
OK!
Fig. 5-3
13
8 9 10 11 12 13 14
60 65 70 75 80 85 90
AZ7500SDR-8
NO
AZ7000SDR-8, 7500SDR-8
front