Summary of Contents for Flight Model F080 Zero Flighter 91"
Page 1
Wing Span:91in/2311mm; Weight:10kg-13kg/22-28.6lbs Wing Area:93sq.dm; Radio:6Channels 8-12Servos; Length:75in/1904mm; Engine:80-100CC Gas CAUTION : this plane is not a toy and should be kept away children under 16 years of age! Before use , please carefully read this manual. ●First-time builders should seek advice from people having building experience in order to assemble the model correctly and to produce its performance to full extent .
Page 2
MAIN WING: Apply epoxy into hinge hole of Apply epoxy into hinge hole of the the wing flap wing...
Page 3
INSTALL SERVO: Use glue to fix up the horns Trim out the film as show Install the ser vo in the ser vo-tray Put the ser vo into the hole screw the servo to wing...
LANDING GEAR: Apply the glue fixed it Gather cover plate for landing gear Install landing gear to the wing,Fixed Gather the parts for the landing gear with screws...
Page 5
LANDING GEAR: Drill the hole at the cover plate Fixed up the cover plate on the landing gear with screws Fixed the spring hole,as shown Finished photo...
Page 6
LANDING GEAR: The air retract have been complete Completed assembly...
Page 7
STABILIZER AND RUDDER Fixed the stabilizer with screws Connect the stabilizer and the fuselage as shown Cut film and cut four slot,Glue the Install Elevator horn as shown hinges with Epoxy...
Page 8
STABILIZER AND RUDDER Install Elevator servo,horn and Install tube, join and anti roll linkage pin as show RUDDER Drill a 3mm hole for Rudder control wire Cut a slot Rudder control wire...
Page 9
RUDDER Install Rudder control wire Drill a hole at the root of Fin Install the rudder as the show...
Page 10
TAIL WHEEL LANDING GEAR Place the two hard wood stick and glue Use Retract Install the tail landing it inside tail of fus gear Finished...
Page 11
WING ASSEMBLE Place the wing panel on fuselage Fixed missile Bottom,then drill two 6mm from fuselage Install the wing Used screws to fixed it...
Page 12
WING Connect the wing LED light on the wing tip Fixed the side winger...
Page 13
ENGINE Drill the engine mounting holes as Use the ruler to measure the length the board provided from firewall to airscrew Diver hub should be have 10-15mm out from cowl end...
Page 14
COWL Glue exhaust pipe with wood block Place the Exhaust pipe on to the Place the Exhaust pipe Screw to fix it Fineshed the cowl...
Page 15
FUEL TANK Install the fuel tank into the fuselage, and fixup it with belt. Install the fuel tank mounting ties under the fuel tank floor. Install the battery,receiver and switch in place as shown.
Page 16
CANOPY Dirll the hole for install Antenna Install the Antenna with and glue it together with AB glue...
Page 17
THE FINISHED PHOTO Another scheme for choice Dong Guang Flight Model CO.,Ltd ADD:No.10,Fu Ning Street,Xian Xi Industrial,Chang An Town, DongGuan City,Guang Dong Province,China Tel: +86-769-85070618 Fax: +86-769-85091868 E-mail:info@flight-model.com Web: http://www.flight-model.com/product/eindex.asp http://flight-model.preview.alibaba.com/ Enjoy it...
Need help?
Do you have a question about the F080 Zero Flighter 91" and is the answer not in the manual?
Questions and answers