Summary of Contents for Flight Model F127 Zlin-42 60
Page 1
Caution:this plane is not a toy! Before use ,please carefully read this manual. Wing Span:65in/1650mm; Flying Weight:3100g; Wing Area:43sq.dm; Radio:4channels 5servos; Length:53.5in/1360mm; Engine:2Cycle 60,4Cycle 90;...
Page 2
Cut away covering film for the servo. Install the servo to the servo cover. Install the servo cover to the bottom of the wings,and Assemble aileron、servo arm and pushrod.
Page 3
Pull out the servo extention from main wing. Cut off the film for work hole Prepare to install rudder servo. Fixup the steering block to the nylon clevis.
Page 4
Assemble rudder servo. Insert the rudder steel into the steering block Securely screw the rudder steel to the steering block.
Page 5
The finished photo as shown. Adjust rudder servo angle. Glue the vertical fin to the fuselage. Fixup the work hole as shown. Glue the elevator to the fuselage by AB glue.
Page 6
Install the elevator pushrod. Fixup the adjustable tri-horn by screws. Elevator servo Rudder servo,which Links the front wheel steering block. Throttle servo. Assemble front wheel steering block pushrod as shown.
Page 7
Fixup the front wheel steering block as shown. Assemble noseleg and steering pushrod. Gather main landing gear, wheels and screws as shown.
Page 8
Install the landing gear by 3pcs screws. Assemble fuel tank as shown.
Page 9
Gather engine mount and screws as shown. Install engine mount as shown. Assemble 2cycle 61 engine as shown.
Page 10
Assemble throttle pushrod as shown. Assemble 4cycle 91 engine as shown. Install throttle pushrod as shown.
Page 11
Install cowling as shown. Fixup the main wing to the fuselage by nylon screw. Install the switch in the right postion.
Page 12
Install the battery and receiver in the right position Assemble the canopy by 2pcs screws that can defend electric shock.
Need help?
Do you have a question about the F127 Zlin-42 60 and is the answer not in the manual?
Questions and answers