Maintenance 6. Alarm
6.1.1.2 Controller Battery
The controller battery is automatically configured at the first connection with the EPSON
RC+7.0 after upgrading to the firmware version 7.1.0.x and later.
If you are using the controller before the version upgrade, there may be a difference in the
NOTE
alarm information. In such case, edit the alarm information. For details on the alarm
information editing, refer to 6.1.3 How to Edit the Alarm Information.
6.1.2 How to View the Alarm Information
The configured alarm information can be checked in the EPSON RC+ 7.0.
(1) Select the EPSON RC+ 7.0 menu-[Tools]-[Maintenance] to display the [Controller
(2) Click the <Controller Alarms> button and display the [Controller Alarms] dialog
NOTE
26
Tools] dialog box.
box.
There are three states of the alarm.
Display
OK
An alarm is configured. An alarm is not occurring.
Expired
An alarm is occurring. Replacement is required.
Not set
An alarm is not configured.
Status
RC90 Series Maintenance Rev.1