Miq/Chv Plus - Xylem WTW MIQ/CHV PLUS Operating Manual

MIQ/CHV PLUS

7.2
Electrical data
Nominal voltage
Power consumption
Protective class
Terminal
IQ S
connections
tions
Valve switching contact
Terminal type
Terminal ranges
Cable feeds
Valve circuits
Switching voltage
Max. switching current
Compressed air
Required air quality
Operating pressure
Connections
ba75539d03 03/2018
All manuals and user guides at all-guides.com
MIQ/CHV PLUS
N connec-
ENSOR ET
Approx. 12 V
Approx. 70 mA
Dry, dust-free and oil-free
6 mm hose nozzles
Max. 24 VDC via a separate power supply module.
IQ S N :
ENSOR ET
For details, see chapter T
IQ S N system operating manual
ENSOR ET
Suitable power supply modules:
– MIQ/PS
– MIQ/24V
Approx. 2,5 W
III
2
Additional connectable SENSORNET terminator
(terminating resistor)
Note:
If the valve is controlled via an external switch,
only one SENSORNET connection can be used
due to the limited number of cable glands. SEN-
SORNET connection 1 or 2 can be selected.
1
Screw-type terminal strip, accessible by opening
the lid
Solid wires:
Flexible wires:
Cable glands M16 x 1.5 on the underside of the
module
5
Max. 5 x10 Pa (5 bar) absolute
Technical data
of the
ECHNICAL DATA
2
0.2 ... 4.0 mm
AWG 24 ... 12
2
0.2 ... 2.5 mm
21