Xylem WTW MIQ/CHV PLUS Operating Manual page 13

MIQ/CHV PLUS
Connecting the
1
control line to the
terminal strip
Fig. 3-1
2
3
4
5
6
ba75539d03 03/2018
All manuals and user guides at all-guides.com
Open the module.
2
1
X8
3
Valve
4
5
Clamping termination for the valve control line
Screw the cable gland (pos. 1 in Fig. 3-1) with the sealing ring (pos. 2)
into the left connection opening.
Loosen the coupling ring (pos. 3 in Fig. 3-1).
Feed the valve control line through the left cable gland in the module
housing.
Connect the wires of the valve control line (pos. 5 in Fig. 3-1) to the
clamping termination for the valve control line. While doing so, pay
attention to the specifications on the label located under the terminal
strip.
Tighten the coupling ring (pos. 3 in Fig. 3-1).
X7 X6 X5 X4 X3 X2 X1
ON
EIN
OFF
AUS
Valve SENSORNET 2 SENSORNET 1
Installation
13