Product Use Warnings; Manikin; Fluids System - CAE Apollo User Manual

Simulator
Table of Contents

Advertisement

Cautions and Warnings

Product Use Warnings

Manikin

• Make sure the manikin is set up on a stable, sturdy work surface that will not collapse and
cause injury to users.
• Operate the manikin in ambient temperatures below 104°F (40°C).
Note: This only applies when using the manikin without the tablet where CAEMaestro
software is installed. For information about temperature ranges for the tablet, see
Ambient Temperature Range in the Specifications section of this User Guide.
• Do not disassemble factory-assembled parts of the manikin without receiving instructions
from Customer Service.
• Clean the manikin with water and a light soap solution only. Do not use chemical solvents.
Do not immerse the manikin in liquid or use abundant liquid to wash the manikin. For
more information, see the Care and Maintenance section.
• Do not place foreign substances into the airway, with the exception of small amounts of
approved lubricant. Only perform invasive procedures supported by the Product as
described in the applicable sections of the User Guide.
• Do not insert any materials into the manikin except the equipment or probes supplied.
• Do not lift the manikin by its limbs. Support the head and lift it from the torso. If necessary,
have another person help you lift and move the manikin using a patient transfer device
such as a patient transfer board, when available.

Fluids System

For manikins such as Apollo that are equipped with fluid systems:
• Do not modify the reservoirs or any assembly component.
• Always protect your eyes, skin, and clothing against accidental exposure.
2
CAEApollo
©2020 CAE 905K351052 v1.1

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Apollo and is the answer not in the manual?

Table of Contents

Save PDF