CAE Apollo User Manual page 44

6. Connect to the simulator by attaching the end of the IV spike set tubing to
the NOSE, MOUTH or EYES port on the simulator's left shoulder. Repeat
for each site necessary.
The NOSE,
MOUTH and
EYES ports
7. Open the clamp and allow fluid to flow into the simulator.
8. Keep the IV bag attached. Adjust the flow rate manually using the roller clamp.
Note: Cleanup is very important when using simulated fluids. For more information about cleaning
the fluid out of the manikin, see the Care and Maintenance section of this guide.
©2020 CAE 905K351052 v1.1
Apollo Prehospital's Left Shoulder
Using Apollo
39