Lamp failure
Lamp is defective. Replace the lamp.
Fault - DC
Power supply has been interrupted. The
supply (+12V)
projector automatically shuts down.
Unplug the power cord after three
minutes and then turn on the projector. If
this problem persists, contact Dell.
Fault - DC
Power supply has been interrupted. The
supplies
projector automatically shuts down.
(secondary)
Unplug the power cord after three
minutes and then turn on the projector. If
this problem persists, contact Dell.
Lamp module
Lamp module connection may be
connection
disrupted. Check the lamp module and
failed
ensure that it is properly installed. If the
problem persists, contact Dell.
84
Troubleshooting Your Projector
OFF
OFF
AMBER
OFF
Flashing
AMBER
OFF
Flashing
OFF
OFF
OFF
OFF
AMBER
OFF
AMBER
AMBER
OFF
AMBER
OFF
AMBER
OFF
OFF
Flashing