PICTURE (in Video Mode)
Using the Picture menu, you can adjust the display settings of your projectors. The
Picture menu, provides the following options:
—Allows you to optimize the display image: Presentation, Bright,
Movie, sRGB (provides more accurate color representation), and Custom (set
your preferred settings).
If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced, the projector automatically switches to
—Allows you to adjust the video source from black and white to fully
saturated color. Press
increase the amount of color in the image.
to increase the amount of green in the image and
the amount of red in the image (available for NTSC only).
Saturation, Sharpness, and Tint are only available when input source is
from Composite or S-Video.
adjust the brightness of the image.
to adjust the display contrast.
to decrease the amount of color in the image and
to decrease the sharpness and
to activate Picture Advance Menu. See "PICTURE
Using Your Projector