Projector Control Panel
• Projector Status: There are 4 status: Lamp On, Standby, Power Saving, and
Cooling. Click the Refresh button to refresh the status and control settings.
• Power Saving: Power Saving can be set to Off, 30, 60, 90, or 120 minutes. For
more information, see "Power Saving" on page 46.
• Alert Status: There are 5 alert status: Lamp fail, Lamp hours running out,
Projector over-heating, Fan error, and Lamp over-heating. Your projector
might lock up in protection mode if any of the alerts are activated. To exit
protection mode, click the Clear button to clear the Alert Status before you
Power ON your projector.
Using Your Projector