Skoda OCTAVIA Workshop Manual page 151

OCTAVIA
Edition 06.05
S00.5103.68.20
Rear Wheel Suspension
- Press down the extension only so far
⊳
-arrow 1-, that the top suspension arm can
be removed upwards -arrow 2-.
Note:
If the extension is pushed so far downwards,
the drive shaft can be damaged.
- Pull screw and top suspension arm out of
the assembly carrier.
- Position the special tools as shown.
⊳
- Pull out the guide joint by turning the spin-
dle.
Installing top guide joint
- Before positioning, the pressure plate
⊳
T10030/1A must be marked along the entire
circumference.
Distance: 3 mm
The marking must be towards the open
side.
Note:
The marking is required for positioning the guide
joint in the trailing arm.
42
------------ 42-53.2 ------------