Skoda OCTAVIA Workshop Manual page 127

OCTAVIA
Edition 04.00
S00.5103.58.20
Rear Suspension
K
Use special tool MP 5-403.
- Fit wheel hub and wheel bearing as far as
possible onto axle stud.
- Screw on special tool MP 5-403 and pull on
wheel hub and wheel bearing as far as the
stop.
K
- Remove special tool MP 5-403 and screw
on wheel hub with twelve-point collar nut and
tighten fully.
Tightening torque: 70 Nm + torque a further
40°
- Install brake disc, insert cross-head screw
and tighten to 4 Nm.
K
Notes:
♦ Replace cap each
♦
n.
- Install brake caliper and tighten hexagon
socket bolts fully to 65 Nm.
and
in
use
------------
42
------------