Skoda OCTAVIA Workshop Manual page 140

42
------------ 42-44 ------------
Rear Suspension
♦ Gearbox lift with attachment, e.g. V.A.G 1383
A with V.A.G 1359/2
♦ Foot pump with high-pressure hose, e.g.
V.A.G 1389 A/1 (Paschke)
♦ Hydraulic removal and insertion device for
wheel bearings, e.g. V.A.G 1459 B (Paschke)
with the following individual tools:
♦ Hollow piston cylinder, e.g. HKZ-15, with
thrust piece, e.g. E-0-204T
♦ Tensile pin, e.g. E-0-217 + 218
♦ Special nut, e.g. E-8-214
♦ Thrust piece, e.g. E-5
♦ Centring device with clip, e.g. E-76-2
♦ Complementary set, e.g. V.A.G 1459 B/2
with the following individual tools:
♦ Thrust sleeve, e.g. E-44
♦ Bell, e.g. E-40
♦ Thrust piece, e.g. E-6-1
♦ Thrust piece, e.g. E-13-1
♦ Thrust plate, e.g. E-39 (VAS 5146)
♦ Thrust plate MP 3-467
♦ Grip of wheel bearing inner race MP 6-416
♦ Cross member Kukko 18-0
- Raise vehicle.
- Take off wheel.
- Remove drive shaft ⇒ page 42-72.
and
testers and aids
OCTAVIA
Edition 11.99
S00.5103.57.20