Skoda OCTAVIA Workshop Manual page 110

42
------------ ------------
Rear Suspension
Installing
-
Notes:
♦ When tightening the hexagon bolt of the
bonded rubber bush, the axle beam must be
in the horizontal position (unladen weight
condition).
♦ When installing the handbrake cables, pay
attention to Fitting location ⇒ page 46-18.
-
Note:
After slackening or replacing the bearing
bracket, check total wheel toe of rear axle, and
align if necessary.
Tightening torques:
Use new bolts!
Use new nuts and bolts!
OCTAVIA
⇒
Edition 04.00
S00.5103.58.20