Table of Contents
Advertisement
Circuit Breaker Reset for Overload Protection
◆
Circuit breakers provide optimal overload protection. When overload
occurs, the circuit breaker will switch to battery mode. You will need to
reset the circuit breaker so UPS will provide the power from utility.
Serial Port to PC
◆
This port allows connection and communication from the DB-9 serial or
USB port on the computer to the UPS unit. The UPS communicates its
status to the PowerPanel Plus™ software. This interface is also
compatible with the UPS service provided by Windows NT, 2000 and XP.
Ethernet (RJ-45) Network Protection Ports
◆
These ports are the protection for your computer network cable, modem
or telephone.
BATTERY REPLACEMENT AND STORAGE
Contact your dealer or call the number in this manual for information on battery replacement.
The order numbers for the battery are as follows:
BA-OP650 for OP650
CAUTION!
Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing
the battery. Service the battery under the supervision of personnel knowledgeable of
batteries and their precautions. Keep unauthorized personnel away from batteries.
CAUTION!
Use only the specified type of battery. See your dealer for replacement
batteries.
CAUTION!
The battery may present the risk of electrical shock. Do not dispose of batteries
in a fire, as it may explode. Follow all local ordinances regarding proper disposal of
batteries.
CAUTION!
Do not open or mutilate the batteries. Release electrolyte is harmful to the skin
and eyes and may be toxic.
CAUTION!
A battery can present a high risk of short circuit current an electrical shock. Take
the following precautions before replacing the battery:
1. Remove all watches, rings or other metal objects.
2. Only use tools with insulated handles.
3. DO NOT lay tools or other metal parts on top of battery or any battery terminals.
4. Wear rubber gloves and boots.
5. Determine if the battery is inadvertently grounded. If inadvertently grounded, remove
source of ground. CONTACT WITH A GROUNDED BATTERY CAN RESULT IN
ELECTRICAL SHOCK! The likelihood of such shock will be reduced if such grounds
are removed during installation and maintenance (applicable to a UPS and a remote
battery supply not having a grounded circuit).
4
Advertisement
Table of Contents
