Installing Your Ups System; Unpacking; Hardware Installation Guide; Basic Operation - CyberPower OP650 User Manual

Office series ups

Hide thumbs Also See for OP650:

Table of Contents

Inspect the UPS upon receipt. The box should contain the following:

(1) UPS Unit; (1) User's Manual for UPS; (1) Warranty Registration Card;

(1) PowerPanel Plus

(1) Serial Interface Cable (DB-9); (1) Serial-to-USB cable; (1) Telephone Cable

1. Connect the equipment to your UPS outlets. Items such as copiers, laser printers,

vacuums, space heaters, or other large electrical devices should not be connected to

the UPS. Please assure that the total loads of your equipments must be less than the

maximum total power load of your UPS.

2. Connect your UPS power cord into a two-pole, three-wire

grounding receptacle only. Please avoid using extension

cords and adapter plugs. (To maintain optimal battery

charge, leave the UPS plugged in at all times.)

3. Press the UPS power button to turn it on. The "Power On" indicator will be illuminated in

"Green".

4. Install your optional software and accessories. To use the software, simply connect the

enclosed serial interface cable to the serial port on the UPS and an open serial port on

the computer.

INSTALLING YOUR UPS SYSTEM

Software Disk; (1) User's Manual for PowerPanel Plus

;

Table of Contents