Table of Contents
Advertisement
MAINTENANCE
Storage
To store your EBM for an extended period of time, cover and store it with the battery fully charged.
Recharge the battery every three months to ensure battery life.
Battery Replacement
Please read and follow the Safety Instructions before servicing the battery. Battery replacement
should be performed by trained personnel who are familiar with the procedures and safety
precautions. Make a note of the Replacement Battery part number.
Safety Precautions
Warning: High voltage – Risk of Electric Shock
Only use replacement batteries that are certified by Cyber Power Systems. Use of incorrect battery
type is an electrical hazard that could lead to explosion, fire, electric shock, or short circuit.
Batteries contain an electrical charge that can cause severe burns. Before servicing batteries, please
remove any conductive materials such as jewelry, chains, wrist watches, and rings.
Do not open or mutilate the batteries. Electrolyte fluid is harmful to the skin/eyes and may be toxic.
To avoid electric shock, turn off and unplug the EBM from the wall receptacle before servicing the battery.
Only use tools with insulated handles. Do not lay tools or metal parts on top of the EBM or battery terminals.
Replacement Batteries
Please refer to the front side of the EBM for the model number of the correct replacement batteries.
For battery procurement, go to www.cyberpower.com, or contact your local dealer.
When the UPS LCD displays Service Battery, use PowerPanel® Business software or log on to the
RMCARD to perform a runtime calibration to verify battery capacity is sufficient and acceptable.
10
©2022 Cyber Power Systems, Inc. All rights reserved.
Advertisement
Table of Contents
