Equipment Checklist - Mitsubishi Electric ecodan ECOSLIM150L-PP-MEUK Installation Manual

Equipment Checklist

3
You will receive the following components fitted to every Mitsubishi Electric Pre-Plumbed Slimline Cylinder
Factory Fitted Components
FTC4 Control Centre
Zone Valves x 2
UPS2 25-60 Pump
Inlet Control Valve
Filling Loop
3kW Immersion Heater
Compact Filter
Auto Bypass Valve
Temperature and Pressure Relief Valve
Automatic Air Vent
Thermistor Pockets
Tundish
THW5 Dual Cylinder Thermistor
THW1 & THW2 Flow and Return Thermistors
Flow Setter Valve
Supplied Loose Components
Main Controller
Expansion Vessel (White)
Manuals
Warranty Card
Pre-Plumbed Slimline Cylinder Installation Manual
6
The standard Slimline Cylinder comes with a single
UPS2 25-60 circulation pump and a pair of zone
valves - one hot water zone and one heating zone.
Due to this product being only available in smaller
sizes than our standard Pre-Plumbed Cylinder it is
expected to be fitted to smaller properties, with lower
flow rate requirements and only a single heating zone.
Recognising that this will not always be the case we
are offering the following 'plug and play' accessory
packs so that the installer can choose to add a
second heating zone or circulation pump if deemed
necessary. For full details please contact your
account manager or heating pre sales technical.
Accessory Packs
2 Heating Zone Pack (PAC-TH011-E included)
2 Circulation Pump Pack
Optional Components
Fix It Foot
PAC-SE41TS-E Wired Thermistor
Fernox HP-5C Antifreeze containing biocide 10 Litre
Fernox HP-5C Antifreeze containing biocide 25 Litre
PAR-WT50R-E Wireless Remote Controller Transmitter
PAR-WR51R-E Wireless Remote Controller Receiver
PAC-TH011HT-E Fossil Fuel Boiler Thermistors
PAC-TH011-E Pair of 2 Zone Sensors (2 pairs required)