Pvc - At Material - Slate, Unity, Pure At Attachments; Black Backer Attachment - Any At Material - Screen Innovations Zero Edge Pro Installation Instructions Manual

PVC AT MATERIAL ATTACHMENT
(Slate AT, Pure AT, Unity AT)
Ensure the screen material is flat and adjust the snap positions if necessary to flatten the screen
material. Once all snaps are attached (following the sequence above), flip screen over and make sure
that the screen material is flat and taut everywhere.
BLACK BACKER ATTACHMENT – ANY AT MATERIAL
Acoustically Transparent (AT) materials come with a black backer that must be installed to eliminate
light scatter.
Gently turn over the screen onto a soft, clean surface, ensuring that the screen material is flat and taut
everywhere.
The optional retrofit channels are installed within the frame, only if the channel nuts are
1
unusable. Install the retrofit channel nut inside the channels. A best practice in inserting these
retrofit channel nuts is to use the screw.
16
Scan the QR code to the PVC snap
attachement video.