Table of Contents
Advertisement
FLATTEN THE MATERIAL AT
THE WEIGHT BAR
Follow these steps:
1. Bump the bottom of the weight bar up several
times along it.
2. Use 2 fingers to pinch the material just above the
middle of the weight bar and lightly pull on the
material to smooth out any wrinkles at the weight bar.
3. Repeat the process to move the material from the
center toward the other edge.
4. If the screen has been
stored in a wrinkled
condition. The wrinkles
may not fall out
immediately. If wrinkles
remain after an hour, call
512.832.6939 (opt.1) for
further instructions.
Flatten the Material at the Weight bar
15
Advertisement
Table of Contents
