Screen Innovations Zero Edge Pro Installation Instructions Manual page 18

Hide thumbs Also See for Zero Edge Pro:
Table of Contents

Advertisement

MAESTRO (WHITE) – AT MATERIAL – ATTACHMENT
Remove and discard the black retaining bumpers, then spread out the posts so they align
3
with the holes in the screen material.
Note: This attachment method is for Maestro material only. Skip to next step for all other AT materials.
Make sure the screen material is centered around the frame before proceeding. Refer to the
4
attachment sequence image on page 11.
Pull one end of the bungee through the hole in the material and place around the post while
holding the other end. Pull the other end over the post. Repeat for all four corners.
15

Advertisement

Table of Contents
loading

Table of Contents